SL-20 Slicer Guitar Effects Pedal

SL-20 Slicer Guitar Effects Pedal Specifications:

• Nominal Input Level: -20 dBu
• Input Impedance: 1 Mohm
• Nominal Output Level: -20 dBu
• Output Impedance: 1 kohm
• Recommended Load Impedance: m10 kohms or greater
• Tempo: Quarter note 30 to 250 bpm
• Maximum recording time: 40 sec.
• Controls: START/STOP, REC, PLAY pedal, TAP pedal, EFFECT LEVEL knob, DIRECT LEVEL knob, BANK knob, PATTERN knob, ATTACK knob, DUTY knob, TEMPO knob, OUTPUT MODE button, PEDAL MODE button
• Indicator: MONO, FIXED, RANDOM, PING-PONG, AUTO, 3D PANNNER, 3D CROSS, LATCH, MOMENTARY, TEMPO, START/STOP, REC, PLAY, TAP, POWER
• Connectors: INPUT jacks R/MONO, L (1/4 inch phone type), OUTPUT jacks R/MONO, L (1/4 inch phone type), EXP PEDAL jack (1/4 inch TRS phone type), MIDI IN connector, AC adaptor jack
• Power Supply: DC 9 V, Dry battery LR6/R6 (AA) type x 6/AC Adaptor (PSA-series: optional) *1
• Current Draw: 110 mA
• Accessories: Owner's Manual, Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information"), Dry battery (R6 (AA) type (carbon) x 6) *2
• Options: AC adaptor (PSA-series), Expression pedal (Roland EV-5, FV500L)
• Size and Weight
• Width: 173 mm (6-13/16 inches)
• Depth: 158 mm (6-1/4 inches)
• Height: 57 mm (2-1/4 inches)
• Weight: 1.1 kg (2 lbs. 7 oz.) Including battery
• * 0 dBu = 0.775 Vrms
• *1 Expected battery life under continuous use: 7 hours (Carbon), 18 hours (Alkaline). These figures will vary depending on the actual conditions of use.
• *2 The battery that was supplied with the unit is for temporary use-intended primarily for testing its operation. We also suggest replacing this with an alkaline dry cell.
• *The specifications are subject to change without notice.