CC 4000 4000W Power Amplifier

CC 4000 4000W Power Amplifier Specifications:

• Stereo Power 8 Ohms: 800 Watts
• Stereo Power 4 Ohms: 1,350 Watts
• Stereo Power 2 Ohm: 2,000 Watts
• Bridged Power 4 Ohm: 4000 Watts
• Output Voltage RMSD: 93 V
• (8 Ohm and 4 Ohm Stereo Power ratings @1kHz, <0.05% THD+N both channels driven 2 Ohm stereo & 4 Ohm Bridged Mono Power ratings @1 kHz, <0.1%THD+N)
  Frequency response: 10 Hz ” 100 kHz; +0, -2 dB at 1 watt
• Power bandwidth: 10 Hz ” 35 kHz; +0, -3 dB at rated 4 Ohm power
• Damping factor (8 Ohm @ 20 Hz to 1 kHz): 500:1
• Input CMRR @ 1khz: > -65 dB
• Gain: selectable between x40 (32 dB) and x20 (26 dB)
• Input sensitivity (x40): 1.88 V ± 3% for 1 kHz, 4 Ohm rated
• power
• Input impedance: >15kohms balanced
• Hum and noise (A-weighted below rated power @ 8 ohms): > -112db
• Crosstalk (1kHz @ rated power 8 Ohm): > -65db
• Class: Switch railed, H
• Power supply: Linear with toroid transformer
• Current draw (120VAC): 1/8 power: 8 ohms: 720W 6 A; 4 ohms: 1,185 W 9.86 A;
• 2 ohms: 1,825 W 15.21 A
• 1/3 power: 8 ohms: 1,835W 15.30 A; 4 ohms: 2,975 W 24.8 A; 2 Ohms 4.535 W 37.8 A
• Thermal emissions 1/3 Power, 4 ohms BTU / hr: 4545
• Cooling: Back to front via 2 variable speed fans
• Input connectors: balanced female XLR,
• Output connectors: Speakon connectors and five-way binding post
• Controls: front panel twin recessed stepped attenuators, circuit breaker/power switch;
• rear panel: mode select, gain select
• LED indicators: Signal presence, ACL (Active clip limiting), Active status, Temp
• Construction: 16-gauge steel chassis, cast aluminum front panel
• Dimensions: 19" W x 3.5" H x 14.875" D, (483 mm x 89 mm x 378 mm)
• Weight: 43.3 lbs. (20 kg)