Play Video

X2000 Stereo 2x450W Power Amp

We're sorry-this item is unavailable.
Contact our experts for a recommendation of great alternatives. Call us at 800-449-9128.

Overview

Crown power that won't cost the temple jewels.

The X Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs. Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference. The Crown X2000 has an output of 450W per side at 4 ohms.

With more than six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. Check out the affordable Crown X Series.

Features

Stereo/parallel/bridge-mono mode
User selectable input sensitivity - 0.775V and 1.4V
Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
Efficient forced-air cooling prevents excessive thermal buildup
Electronically balanced RCA and XLR inputs; binding post and Speakon outputs
Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
Protection against shorts, no-load, on/off thumps and radio-frequency interference

Beef up your system. Order today.

Specs

X2000 Stereo 2x450W Power Amp Specifications:

Guaranteed Minimum Power: 450W (per channel) @ 4 ohms / 330W (per channel) @ 8 ohms / 900W bridge mono @ 8 ohms

Frequency Response (at 1 watt): 20Hz - 20kHz, +0/-1dB

Total Harmonic Distortion (THD): < 0.5%, 20Hz - 20kHz

Intermodulation Distortion (IMD) 60Hz and 7kHz at 4:1, from full rated output

to “30 dB: 0.35%

Slew Rate: >10V/us

Voltage Gain: 29dB 31dB 33dB 36dB

Damping Factor (8), 10Hz - 400Hz > 200

Signal-to-Noise Ratio: (below rated power, 20Hz to 20kHz, A-weighted): > 100dB

Crosstalk (below rated power)

At 1kHz: “75dB

At 20kHz: “59dB

Input Sensitivity for full rated power at 8Ohm: 0.775V or 1.4V

Input Impedance (nominal)

Balanced: 20Kï“

Unbalanced: 10Kï“

Connectors, Controls and Indicators

Input Connectors: One balanced XLR and one unbalanced RCA per channel

Output Connectors: (Speaker Connectors) 4-POLE Speakon® and one pair Binding Post per channel

Front Panel Controls: Power on/off switch, one gain control per channel

Rear Panel Controls Output mode switch: stereo (dual), parallel or bridge

Input sensitivity switch: 0.775V or 1.4V

Power Indicator: One blue LED

Signal Indicator: One green LED per channel

Clip (peak) Indicator: One yellow LED per channel

Fault Indicator: One red LED per channel

Construction

Protection: Protection against short circuits, no-load, on/off muting,
RF interference. Stable into reactive or mismatched loads
Ventilation: Flow-through ventilation from front to back
Cooling: Internal heat sinks with forced air. Fan cooled,
speed regulated, thermal protection

Reviews

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

Shop with a Friend

Free Shipping

Free Standard Ground shipping (48 contiguous states, some overweight and Used/Vintage items excluded).
Orders placed before 3 p.m. ET usually ship the same business day.

Learn More

2-Year Free Warranty on Guitars

Every guitar or bass you purchase from Musician's Friend (electric or acoustic, New or Open Box) includes two years of protection from manufacturer defects.

We're Here for You

Our Gear Advisers are available to guide you through your entire shopping experience. Call or Chat for expert advice and to hear the latest deals.

Your Cart Is Empty

X2000 Stereo 2x450W Power Amp

Crown power that won't cost the temple jewels.

Features

X2000 Stereo 2x450W Power Amp Specifications:

Musician's Friend Support