TWO-C PCI Card

TWO-C PCI Card Specifications:

• PCI bus: Version 2.2 compliant
• Data transfers: Up to 132 MBps using custom 16-channel, zero-wait state, scatter-gather DMA engine; bus mastering
• Power: LynxTWO-A: +5V @ 600 mA, +12V @ 500 mA, -12V @ 150 mA
• Dimension: 5.0"H X 7.4"W X 0.75"D (half-size PCI card)
• Certifications: CE and FCC Class B

• Two inputs / six outputs
• Type: Electronically balanced or unbalanced, XLR connectors on L2Audio Cable
• Level: +4 dBu nominal /+20dBu max. or -10dBV nominal / +6dBV max., software selectable in channel pairs
• Bandwidth: < 10Hz - 92 kHz @ 200 kHz sample rate, < 10Hz - 46 kHz @ 96 kHz sample rate, < 10Hz - 23 kHz @ 48 kHz sample rate (analog input to analog output)
  Input impedance: Balanced mode: 24k , unbalanced mode: 12k
• Output impedance: Balanced mode: 100, unbalanced mode: 50
• Output drive capability: 600 impedance, 0.2F capacitance
• A/D and D/A types: 24-bit, multilevel, delta-sigma
• Sample Rates: 8 kHz to 200 kHz, including all standard rates with variable adjustment
• Bit Depth: 8-, 16-, 24- or 32-bit file types
• Onboard buffer size: 16KB per input and output stream (mono or stereo)

• (Analog performance specs measured at 44.1 kHz sample rate, 24-bit, card installed in computer)
• Frequency Response: 20 - 20kHz, ± 0.05dB at 44.1kHz sample rate
• Dynamic range: 117 dB, A-wtd.
• Signal-to-Noise: 116 dB, A-wtd.
• Channel crosstalk: <-120 dB, 1kHz signal @ -1dBFS
  THD+N: -108dB (0.0004%) @ -1dBFS, -104dB (0.0006%) @ -8 dBFS, 1kHz signal, 22Hz-22kHz BW

• (Analog performance specs measured at 44.1kHz sample rate, 24-bit, card installed in computer)
• Frequency response: 20-20kHz, ±0.05dB at 44.1kHz sample rate
• Dynamic range: 117dB, A-wtd.
• Signal-to-noise: 117 dB, A-wtd.
• Channel crosstalk: <-120 dB, 1 kHz signal @ -1dBFS
  THD+N: -97 dB (0.0014%) @ -1 dBFS, -104 dB (0.0006%) @ -8 dBFS, 1kHz signal, 22Hz - 22kHz BW

• Number / Type: One input and one output, AES/EBU or S/P DIF format, transformer coupled, XLR connectors on L2Sync Cable
• Sample rates: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
• Sample rate conversion: Supports conversion ratios up to 3:1 on digital input, 128 dB dynamic range
• Bit Depth: 8-, 16-, 24- or 32-bit file types
• Control / Status: Complete subcode and channel status support
• Onboard buffer size: 16KB per input and output stream (mono or stereo)

• Number: One external and one internal
• Compatibility: Supports Lynx ADAT, AES/EBU, and other multichannel expansion modules
• Type: High-speed serial, 8-channel input and output (each port) or 16-channel input and output (single port), 24-bit data, 96kHz rate

• Type: LTC receiver (in) and generator (out) , BNC connectors on L2Sync cable
• Frame rates: 24, 25, 29.97, 30Hz - drop and non-drop
• Input sync rate: 1/30 to 80 times nominal frame rate
• Input levels: 200 mV to 10V / 10K
• Output level: 1V / 75

• Number: (External) one input and output, BNC connectors on L2Sync Cable, (Internal) one input and output on board-mounted headers
• Level/Impedance: TTL (clock signals) / 1Vpp (video) 75
• Type: Input - word clock, 256X word clock, 13.5 and 27 MHz video clocks, NTSC or PAL composite video; Output - word clock

• Channel capacity: 32 input channels, 16 sub outputs
• Resolution/Dither: 32-bit / TPDF, Shaped TPDF, or RPDF
• Monitor mixing: Any input to multiple outputs
• Metering: Peak levels to -120dB on all inputs and outputs

• Audio port: Bracket-mounted, 25-pin female D-sub connector for analog audio input and output
• Sync port: Bracket-mounted, 15-pin high-density female D-sub connector for digital input and output, sync in and out

• L2Audio cable: 25-pin male D-sub to male and female XLR connectors on six-foot shielded twisted pair cabling
• L2Sync cable: 15-pin high-density male D-sub to (1) male and (1) female XLR on six-foot shielded twisted pair cabling and (4) female BNC connectors on two-foot 75 coaxial cabling

• Windows drivers: Windows 98 / ME / NT/ 2000 / XP: MME, ASIO 2.0, and DirectSound
• Macintosh drivers: ASIO 2.0 for OS 9
• LynxTWO mixer application: Provides complete control of digital mixer and all hardware settings