Apollo Interface 18x24 FireWire Audio Interface w/ UAD-2 DUO DSP & Thunderbolt I/O Option Bay

Apollo Interface 18x24 FireWire Audio Interface w/ UAD-2 DUO DSP & Thunderbolt I/O Option Bay Specifications:

• Intel-based Mac computer
• Mac OS X 10.6.8 Snow Leopard or 10.7.2 Lion (or higher)
• UAD Powered Plug-Ins v6.1.1 (or higher)
• Available FireWire 800 port
• 1024 x 900 minimum display resolution
• 1GB available hard drive space
• CD-ROM drive or Internet connection for software installation
• Internet connection for registration, UAD plug-in authorization, & updates

• 
  I/O Complement
• Microphone Inputs = 4
• High-Impedance Inputs = 2
• Analog Line Inputs = 8
• Analog Line Outputs = 8
• Analog Monitor Outputs = 2 (1 stereo pair)
• Headphone Outputs = 2 stereo (independent mix buses)
• ADAT = Up to 8 channels via dual I/O ports with S/MUX
• S/PDIF = 1 stereo input, 1 stereo output
• FireWire 800 (IEEE 1394b) = Dual ports
• Thunderbolt (via Option Card) = Dual ports
• Word Clock = 1 input, 1 output
• A/D “ D/A Conversion
• Supported Sample Rates (kHz) = 44.1, 48, 88.2, 96, 176.4, 192
• A/D Bits Per Sample = 24
• Simultaneous A/D conversion = 8 channels
• Simultaneous D/A conversion = 4 channels
• Analog Round-Trip Latency = 1.1 milliseconds @ 96kHz sample rate
• Analog Round-Trip Latency with four serial UAD-2 plug-ins via Console application = 1.1 milliseconds @ 96kHz sample rate

• Microphone Inputs 1 “ 4
• Jack Type: XLR Female
• Phantom Power: +48V, Switchable
• Dynamic Range: 118 dB (A“weighting)
• Signal-to-Noise Ratio: 118 dB (A“weighting)
• Total Harmonic Distortion + Noise: “110 dB
• Hi“Z Inputs
• Jack Type: 1/4 Male (Mono TS plug required)
• Dynamic Range: 117 dB (A“weighting)
• Signal-to-Noise Ratio: 117 dB (A“weighting)
• Total Harmonic Distortion + Noise: “103 dB
• Line Inputs 1 “ 4
• Jack Type: 1/4 Male TRS Balanced
• Dynamic Range: 117 dB (A“weighting)
• Signal-to-Noise Ratio: 117 dB (A“weighting)
• Total Harmonic Distortion + Noise: “107 dB
• Line Inputs 5 “ 8
• Jack Type: 1/4 Male TRS Balanced
• Dynamic Range: 117 dB (A“weighting)
• Signal-to-Noise Ratio: 117 dB (A“weighting)
• Total Harmonic Distortion + Noise: “107 d
• Line Outputs 1 “ 8
• Jack Type: 1/4 Male TRS Balanced
• Dynamic Range: 118 dB (A“weighting)
• Frequency Response: 20Hz “ 20kHz, ±0.1 dB
• Signal-to-Noise Ratio: 118 dB (A“weighting)
• Total Harmonic Distortion + Noise: “106 dB
• Monitor Outputs 1 “ 2
• Jack Type: 1/4 Male TRS Balanced
• Frequency Response: 20Hz “ 20kHz, ±0.1 dB
• Dynamic Range: 115 dB (A“weighting)
• Signal-to-Noise Ratio: 114 dB (A“weighting)
• Total Harmonic Distortion + Noise: “103 dB
• Stereo Headphone Outputs 1 & 2
• Jack Type 1/4 Male TRS Stereo/Unbalanced
• Frequency Response: 20Hz “ 20kHz, ±0.1 dB
• Dynamic Range: 113 dB (A“weighting)
• Signal-to-Noise Ratio: 113 dB (A“weighting)
• Total Harmonic Distortion + Noise: “101 dB

• 
  S/PDIF
• Jack Type: Phono (RCA)
• Format: IEC958
• ADAT
• Jack Type: Optical TOSLINK JIS F05
• Format: ADAT Digital œLightpipe with S/MUX
• Channel Assignments @ 44.1kHz, 48kHz Port 1 = Channels 1 “ 8, Port 2 = 1 “ 8 (mirrored)
• Channel Assignments @ 88.2kHz, 96kHz Port 1 = Channels 1 “ 4, Port 2 = Channels 5 “ 8
• Channel Assignments @ 176.4kHz, 192kHz Port 1 = Channels 1 “ 2, Port 2 = Channels 3 “ 4
• Word Clock
• Jack Type: BNC
• Lock Range: ±0.5% of any supported sample rate
• Word Clock Input Termination: 75 Ohms, switchable
• Synchronization Sources
• Internal, Word Clock, S/PDIF, ADAT

• Power Supplies: External AC to DC Power Supply Brick, Internal DC to DC Power Supply
• AC Connector Type: IEC Male
• AC Requirements: 100V “ 240V AC, 50 “ 60Hz
• DC Connector Type: XLR 4-Pin Locking Male (Neutrik P/N NC4MDM3-H)
• DC Requirements: 12 VDC, ±5%
• Maximum Power Consumption: 6.5 amperes

• Dimensions (WxHxD): 19 x 1-3/4 x 12-1/8
• Weight: 9.1 lb.