DSR112 Active Loudspeaker

DSR112 Active Loudspeaker Specifications:

• Model: DSR112
• System Type: 12" 2-way, Bi-amp Powered Speaker, Bass-reflex Type
• Frequency Range (-10dB): 55Hz œ 20kHz
• Frequency Response (-3dB): 60Hz œ 18kHz
• Coverage Angle: H90—V60
• CrossoLver Type: FIR-X tuning (linear phase FIR filter)
• Crossover Frequency: 1.7kHz
• Measured Maximum SPL (peak) IEC noise @ 1m: 134dB SP

• Amplifier Type: Class-D
• Power Rating: 1300W
• Low-Frequency: 850W
• High-Frequency: 450W
• Cooling: Natural Convection
• 
  
  Controls
  LEVEL control
  LINE/MIC switch
  HPF switch
  D-CONTOUR switch
  FRONT LED DISABLE switch, POWER switch
• Indicators
  PEAK: x1 (Red)
  LIMIT:x1 (Red)
  PROTECTION:x1 (Red)
  POWER:x1 (Green)
  FRONT:x1 (White)
  HPF:x1 (Orange)
  D-CONTOUR :x1 (Orange)
• HPF Frequency: 120Hz (-6dB) 24dB/oct
• Boost Type: D-CONTOUR (Dynamic CONTOUR)

• 
  
  Load
  POWER switch on/off: Mute
  DC-fault: power supply shuts down automatically (reset manually)
  Integral Power Protection: Limit the output (return automatically)
  Clip limiting
• Amplifier
  Thermal: Limit the output or Mute (return automatically)
  Output through current: Amplifier shuts down automatically (reset manually)
• Power supply
  Thermal: Amplifier shuts down automatically (reset manually)
  Over voltage: power supply shuts down automatically (reset manually)
• Connectors
  Input: XLR-3-31 x1 (Balanced), TRS Phone Jack x1 (Balanced)
  Output: XLR-3-32 x1 (Balanced), Parallel connection with INPUT
  Power: AC inlet x1
• Power Consumption (1/8Power):100W

• Low-Frequency: 12" cone
• Magnet: Neodymium Magnet
• Voice Coil: 3" diameter
• High-Frequency: 2" Titanium diaphragm compression driver
• Magnet: Neodymium Magnet
• 
  
  Enclosure
  Dimension (W x H x D): 14-5/8" x 25-2/8" x 14-4/8", (370—638—368mm)
  Weight: 47 lb., (21.2kg)
  Externals Finish, Color: LINE-X, Black
  Grille: 16-gauge matte black powdercoated perforated steel grille
  Metal Handle: 1 piece (Top Board)
• Pole Socket: 35mm Diameter (Bottom Board)
  Flying Hardware: 3 x M10 (TOP L/R 1 piece each, Bottom rear 1 piece)

• MIC/LINE switch: LINE
• Input Sensitivity: LEVEL position: maximum: 0dBu, LEVEL position: center (12 O'clock): +7dBu
• Maximum Input Level: +24dBu
• Input Impedance: 12kÎ

• Input Sensitivity (LEVEL position): maximum: -25dBu
• Maximum Input Level: -11dBu
• Input Impedance: 8kÎ