MSP10 Active Studio Monitor - Each

MSP10 Active Studio Monitor - Each Specifications:

• Type: Amplified 2-Way Bass Reflex Powered Speaker (Bi-Amplified)
• Crossover Frequency: 2.0 kHz. 30dB/oct
• Frequency Range: 40 Hz to 40 kHz (-10 dB)
• Sensitivity: -10 dB at -6 dB position (for 100dB/SPL. 1 m on Axis)
• Maximum Output Level: 110dB (1 m on Axis)
• Dimensions: 10-3/8"W x 16-1/2"H x 12-7/8"D
• Weight: 44.1 lbs.
• Low Frequency Speaker Unit: 7-7/8" (20cm) cone (4 ohms magnetic shielded)
• HF: 2.5 cm Titan Dome (8 ohms magnetic shielded)
• Enclosure Type: Bass Reflex
• Amp. Unit
• Maximum Output Power LF: 120 W at 400 Hz, THD= 0.02%, RL= 4 ohms
• HF: 60 W at 10 kHz, THD= 0.02%, RL= 8 ohms
• Input Sensitivity/
• Impedance -6 dB to +4 dB/10 k ohms
• Hum & Noise ‰¤-67 dBu (Volume= Min) DIN Audio filter
• Signal to Noise Ratio ‰98 dB (IEC-A Weighting)
• Controls TRIM Switch
• LOW: 3 positions (0 dB, -1.5 dB, -3 dB at 50 Hz)
• HIGH: 3 positions (+1.5 dB, 0 dB, -1,5 dB at 10 kHz)
• LOW CUT Switch: ON/OFF
• SENSITIVITY Control
• POWER Switch: ON/OFF
• Connectors: Input XLR-3-31
• Power Indicator/Clip Indicator: Green/Red LED
• Power Requirement USA: AC120 V, 60Hz
• Power Consumption USA: 150W