Legend 10516 10" Guitar Speaker

Legend 10516 10" Guitar Speaker Specifications:

• Nominal Basket Diameter: 10", 254mm
• Nominal Impedance*: 16 ohms
• Power Rating Watts: 75W
• Resonance: 96Hz
• Usable Frequency Range: 100Hz-5.8kHz
• Sensitivity***: 100
• Magnet Weight: 16 oz.
• Gap Height: 0.25", 6.35mm
• Voice Coil Diameter: 1.5", 38.1mm
• THIELE & SMALL PARAMETERS
• Resonant Frequency (fs): 96Hz
• DC Resistance (Re): 10.20
• Coil Inductance (Le): 0.64mH
• Mechanical Q (Qms): 13.80
• Electromagnetic Q (Qes): 1.32
• Total Q (Qts): 1.21
• Compliance Equivalent Volume (Vas): 21.8 liters / 0.8 cu. ft.
• Peak Diaphragm Displacement Volume (Vd): 0cc
• Mechanical Compliance of Suspension (Cms): 0.13mm/N
• BL Product (BL): 9.9 T-M
• Diaphram Mass inc. Airload (Mms): 21 grams
• Efficiency Bandwidth Product (EBP): 73
• Maximum Linear Excursion (Xmax): 0.0mm
• Surface Area of Cone (Sd): 344.9 cm2
• MOUNTING INFORMATION
• Recommended Enclosure
• Sealed: Acceptable
• Vented: Acceptable
• Overall Diameter: 10.11", 256.8mm
• Baffle Hole Diameter: 9.13", 231.8mm
• Front Sealing Gasket: fitted as standard
• Rear Sealing Gasket: fitted as standard
• Mounting Holes Diameter: 0.23", 5.7mm
• Mounting Holes B.C. D.: 9.6", 243.8mm
• Depth: 4.1", 104mm
• Net Weight: 4.3 lbs., 2 kg
• Shipping Weight: 5.4 lbs., 2.5 kg
• MATERIALS OF CONSTRUCTION
• Coil Construction: Copper voice coil
• Coil Former: Polyimide former
• Magnet Composition: Ferrite magnet
• Core Details: Non-vented core
• Basket Materials: Pressed steel basket
• Cone Composition: Paper Cone
• Cone Edge Composition: Paper cone edge
• Dustcap Composition: Solid composition felt dust cap
• FOOTNOTES
• *Please consult www.eminence.com for specifications of models with alternative impedances.
• **Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
• ***The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
• ****BETA 8CX, 10CX, 12CX and ACOUSTINATOR CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.