PPM1012 / C300z PA Package

PPM1012 / C300z PA Package Specifications:

• 
  Distortion (THD + N)
• (1 kHz, 30 kHz bandwidth)
• Mic mono: <0.003%
  Line mono: <0.003% low gain
  Line stereo <0.003% at main out
  
• Main mix output noise
• (1 kHz, 30 kHz bandwidth)
• Main mix level down, all channel levels down: -95 dBu
• Main mix level 0 dB, all channel levels down: -89 dBu
• Main mix level 0 dB, all channel levels 0 dB: -84 dBu
• 
  Frequency Response
• (+0 dB/-3 dB)
• Mic mono input: < 10 Hz-100 kHz
  Line mono inputs: < 10 Hz-32 kHz
  Line stereo inputs: < 10 Hz-80 kHz
  
• Equivalent Input Noise (EIN)
• Mic input (20 Hz - 20 kHz)
• 150 Œ termination: -128 dBu
• 
  Gain
• Mic mono input: 0 dB to +50 dB
• Line mono inputs: -20 dB to +30 dB low gain
• Line stereo inputs: -20 dB to +20 dB low gain
• 
  Maximum Levels
• Mic mono input: +21 dBu
• Line mono inputs: +21 dBu
• Line stereo inputs: +21 dBu
• Preamp main and monitor outputs: +21 dBu
• 
  Impedances
• Mic mono input, balanced: 3.6 kŒ balanced
• Line mono input, balanced: 20 kŒ balanced
• Line mono input, Ch 7, 8 Hi-Z: 500 kŒ unbalanced
• Line stereo inputs: 20 kŒ balanced
• Main and monitor preamp outputs: 240 Œ balanced; 120 Œ unbalanced
• 
  Channel EQ
• High Shelving (all channels) ±15 dB @ 12 kHz
• Mid Mono Channels:
  Mid Peaking, sweepable ±15 dB
  Mid sweep range: 100 Hz to 8 kHz
• Mid Stereo Channels:
  Hi Mid Peaking: ±15 dB @ 2.5 kHz
  Lo Mid Peaking: ±15 dB @ 400 kHz
  Low Shelving (all channels) ±15 dB @ 80 Hz
• Phantom Power: +48 VDC, globally switchable to all Mic inputs
• 
  9-Band Graphic EQ
• Main and Monitor 1: ±15 dB @
• 63, 125, 250, 500, 1k,
• 2k, 4k, 8k and 16 kHz
• 
  Connections
• Mic input: XLR balanced
• Line mono input: 1/4" TRS balanced
• Line stereo input: 1/4" TRS unbalanced
• Preamp main outputs: 1/4" TRS balanced
• Monitor outputs: 1/4" TRS balanced
• Inserts: 1/4" TRS unbalanced
• Loudspeaker outputs: 1/4" TS and Neutrik
• Speakon
• 
  Loudspeaker outputs
• (Both channels loaded and driven at 1 kHz.)
• Peak output power @ 4 Œ: 2 x 800 W peak
• Average output power @ 4 Œ: 2 x 400 W rms, 1% THD; 2 x 500 W rms, 3% THD
• Average output power @ 8 Œ: 2 x 250 W rms, 1% THD; 2 x 300 W rms, 3% THD
• Recommended load impedance: 4 - 8 Œ per side
• 
  Running Man Effects
• Type: 32-bit internal processor, mono in, stereo out
• Effects presets: 24 Mackie-designed
• presets
• Power Consumption: 120 VAC, 50/60 Hz, 250 watts; 220-240 VAC 50/60Hz: 250 Watts
• Dimensions (H x W x D): 19.2 x 17.4" x 5.2" (487 mm x 442 mm x 133 mm)
• Weight: 29 lb (13.2 kg)

• 
  Acoustic Performance
• Frequency Response (-3 dB): 55Hz - 18kHz
• Frequency Range (-10 dB): 45Hz - 20kHz
• Maximum SPL Long-term @ 1m: 123dB
• Crossover Frequency: 1800Hz
• 
  Audio:
• Input Type: Speakon-style NL4 jack 1/4-inch TS phone jack
• Input Impedance: 8 ohms
• Power Handling: (RMS) 300 watts, (Peak) 750 watts
• 
  Construction Features
• Basic Design: Asymmetrical Trapezoidal
• Material: Polypropylene
• Finish: Black Textured
• Handles: One on each side, one on top
• Grille: Perforated metal with weather-resistant coating
• Operating temperature range: 14∞F to 113∞F, (-10∞C to 45∞C)
• 
  Physical properties
• Height: 26.1", (663mm)
• Width: 16.0", (406mm)
• Depth: 14.8", (376mm)
• Weight: 46lb. (20.9kg)

• Element: Moving coil dynamic
• Polar pattern: Unidirectional
• Frequency response: 70Hz ‚Äî 12.000Hz
• Open circuit sensitivity: -52dB (2.5 mV)
• Impedance: 500 Ohms
• Switch: On/off
• Weight: 329 grams (11.6 oz.)
• Dimensions: 178.3mm (7.02") length, 56.3mm (2.22") body diameter
• Output Connector: Integral 3-pin XLR M-type
• Accessories: Slip-in stand clamp for 5/8" ‚Äî 27 threaded adaptor