Two Notes AUDIO ENGINEERING Reload II Multi-Impedance Reactive Load Box and Active Attenuator

Play Video

{"id": "M19852", "categoryId":"site1HAAI", "pageName":"Reload II Multi-Impedance Reactive Load Box and Active Attenuator", "pageUrl":"/amplifiers-effects/two-notes-audio-engineering-reload-ii-multi-impedance-reactive-load-box-and-active-attenuator", "thumbnailUrl":"", "addToCartUrl":"/amplifiers-effects/two-notes-audio-engineering-reload-ii-multi-impedance-reactive-load-box-and-active-attenuator", "hasFeatures":"0", "isAccessory":"0", "message":"<p>The Two Notes Audio Engineering Reload II multi-impedance reactive load box and active attenuator is not just an ordinary load box and attenuator; it's a portal to a world of sonic possibilities. This premium all-analog reactive load box allows you to crank your tube amp to its sweet spot, capturing its full dynamic range and harmonic richness, even at whisper-quiet volumes. With its twin-channel operation, selectable multi-impedance compatibility, and continuous active attenuation, the Reload II is the ultimate tool for harnessing the power of your amplifier in any situation, from studio recording to live performance.</p> <h3>Celestion-Approved Load Response</h3> <p>At the heart of the Reload II lies an all-new reactive load, meticulously engineered to provide a Celestion-approved load response. This groundbreaking design ensures that your amplifier's power stage interacts with the load box just as it would with a real speaker cabinet, preserving the feel, response, and tonal integrity of your amp. Whether you're using a vintage tube amp or a modern high-gain monster, the Reload II's reactive load ensures that you're getting the most out of your amplifier.</p> <h3>Twin-Channel Versatility</h3> <p>The Reload II's twin-channel design offers unparalleled flexibility. Connect two different amplifiers or line-level sources simultaneously, each with its own dedicated source selection, attenuation, and cabinet simulation. This opens up a world of creative possibilities, allowing you to blend different amp tones, create complex layered soundscapes, or seamlessly switch between different setups during a performance.</p> <h3>Continuous Active Attenuation</h3> <p>The Reload II's continuous active attenuation lets you precisely control the output level of your amplifier without sacrificing tone or feel. Whether you need total silence for late-night recording sessions or stage-ready volume for live performances, the Reload II delivers. The integrated studio-grade power amplifier ensures that your attenuated signal remains clear, dynamic, and full of life, even at the lowest volumes.</p> <h3>Stereo/Dual Mono Operation</h3> <p>Embrace the power of stereo or dual mono operation with the Reload II. Its two independent cabinet outputs and XLR line outputs allow you to create expansive soundscapes, experiment with stereo effects, or send separate signals to your audio interface and front-of-house. The footswitchable stereo effects loop further enhances the Reload II's versatility, providing seamless integration for your favorite pedals and effects units.</p> <h3>GENOME Reload II Edition Included</h3> <p>The Reload II comes bundled with GENOME Reload II Edition, a powerful software ecosystem for cabinet simulation, amp profiling, and more. Explore a vast library of virtual cabinets, experiment with different microphone placements, and fine-tune your tone with precision. The included Series-R DynIR cabinet collection features 24 premier virtual cabinets from Celestion and Two notes Audio Engineering, providing a starting point for your sonic explorations.</p> <h3>Built for the Modern Musician</h3> <p>The Reload II reactive load box and active attenuator is designed to seamlessly integrate into any studio or live setup. Its compact and rugged design features genuine wood side panels for topbox configuration, and it can be rack-mounted using the included rack ears. The Reload II is not just a tool; it's an extension of your creativity, empowering you to explore new sonic territories and unleash the full potential of your amplifier.</p>", "value":"999.99", "priceMin":"999.99", "priceMax":"999.99", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Two Notes AUDIO ENGINEERING", "reviewStarImageUrl": "https://static.musiciansfriend.com/img/brand/mf/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site1LM,site1LKA,site1LIH,site1LFN,site1LDXB", "stickerText": ""}

Pre-Order

Two Notes AUDIO ENGINEERING Two Notes AUDIO ENGINEERING

Two Notes AUDIO ENGINEERING Reload II Multi-Impedance Reactive Load Box and Active Attenuator

Name: Two Notes AUDIO ENGINEERING Reload II Multi-Impedance Reactive Load Box and Active Attenuator
Brand: Two Notes AUDIO ENGINEERING
SKU: M19852000000000
Price: 999.99 USD
Availability: PreOrder

Q&A SKU #M19852000000000

$99999

6-Month Special Financing

Limited time Learn more

Special Financing

Applying is fast and easy!
Status and credit amount on validation!
Instant decisions so you can make your purchase now!

*Qualifying purchase (excluding gift certificates) must be one receipt. 6 month special financing excludes open box gear and cannot be combined with promotional coupons or manual discounts. No interest will be charged on the promo purchase if you pay the promo purchase amount in full within the promotional period. If you do not, interest will be charged on the promo purchase from the purchase date. Depending on purchase amount, promotion length and payment allocation, the required minimum monthly payments may or may not pay off the purchase by the end of the promotional period. Regular account terms apply to non-promotional purchases and, after the promotion ends, to the promotional balance. For new accounts: The Purchase APR is 29.99%; Minimum Interest Charge is $2. Existing cardholders should see their credit card agreement for their applicable terms. Subject to credit approval.

More ways to pay:

Lease-to-own with Progressive Leasing. Learn more

Earn 8,000 reward points

($80.00 in credit)

Earn 8,000 reward pts.

($80.00 in credit)

New Item!

Pre-order yours today – No charge until it ships

Free Shipping
New
Flexible Financing
Lowest Price

Gold Coverage Protection

60 MONTH

+ $269.99

36-MONTH

+ $169.99

24-MONTH

+ $129.99

No plan Selected

Protect your gear

Overview

Crank your tube amp to its sweet spot with this new load box and attenuator.

The Two Notes Audio Engineering Reload II multi-impedance reactive load box and active attenuator is not just an ordinary load box and attenuator; it's a portal to a world of sonic possibilities.

Specs

Reload II Multi-Impedance Reactive Load Box and Active Attenuator Specifications:

Load Box

Load Box Type: Reactive load featuring a Celestion-approved load response
Impedance: 4, 8, or 16 ohms (switchable)
Maximum Admissible Power: 200W RMS (assuming proper ventilation)
Maximum Temporary Admissible Power: 250W peak (assuming proper ventilation)

Input/Output

Speaker Input: 1/4" unbalanced (TS)
Maximum Input Voltage: 140V AC (45dBu)
Security Load: 270Ω / 20W
Load Input Level: Adjustable via potentiometer with continuous attenuation (-inf) to continuous amplification (+20dB)
Speaker Outputs: (2) 1/4" unbalanced (TS), Minimum Load 3.5Ω
Line Inputs: Dual-mono, (2) 1/4" balanced (TRS), Impedance 10kΩ, Switched jacks for routing to an unplugged channel
Line Outputs: Dual-mono, (2) Balanced XLRs with Ground/Lift Switches, Impedance 300Ω, Gain (In to Out) +4 to -inf dB, Maximum Output Level 20dBu, Noise Under -99dBu from 20Hz to 20kHz, Frequency Response @ -1dB 20Hz to 20kHz

Power Amplifier

Maximum Output Power (single channel at THD+N <1%): 215W RMS @ 4 Ohms, 120W RMS @ 8Ohms, 50W RMS @ 16 Ohms
Maximum Output Power (both channels driven at THD+N <1%): 2 x 150W RMS @ 4 Ohms, 2 x 120W RMS @ 8 Ohms, 2 x 50W RMS @ 16 Ohms
FX Loop
Type: Dual-mono with independent channel controls
Connectors: (2) Send + (2) Return via 1/4" unbalanced (TS)
Compatibility: +4dBu and -10dBV devices (selectable via dedicated switch per channel)
Features: Dry/Wet potentiometer with ON/OFF switch, Copy Channel A return to Channel B output, FX loop activation/deactivation via footswitch (1/4" TRS or TS)

Tone Shaping

Tone Controls: Depth (+8dB @75Hz on potentiometer at 100%), Presence (+8dB @4kHz on potentiometer at 100%), MOJO (per channel)
Safety/Protection
Cooling: Passive cooling with amplifier heatsink and Load Box heatsink, Active cooling with temperature-controlled fan with 2 speeds (Slow & Boost)
Thermal Security: Yes, with 270Ω security load

Power

Power Supply: IEC60320 C14 power connector

Weight & Dimensions

Dimensions (W x H x D): 14.4" x 3.5" x 8.7"/9.4" (including connectors and knobs)
Weight: 15.2 lbs
Input Voltage: 100V - 230V @ 50-60Hz
Power Consumption: 100W Max

Reviews

Q&A

Questions & Answers

Do you have questions about this product?

Shop with a Friend

Free Shipping

Free Standard Ground shipping (48 contiguous states, some overweight and Used/Vintage items excluded).
Orders placed before 3 p.m. ET usually ship the same business day.

Learn More

2-Year Free Warranty on Guitars

Every guitar or bass you purchase from Musician's Friend (electric or acoustic, New or Open Box) includes two years of protection from manufacturer defects.

We're Here for You

Our Gear Advisers are available to guide you through your entire shopping experience. Call or Chat for expert advice and to hear the latest deals.

Your Cart Is Empty

Two Notes AUDIO ENGINEERING Reload II Multi-Impedance Reactive Load Box and Active Attenuator

Special Financing

Crank your tube amp to its sweet spot with this new load box and attenuator.

Reload II Multi-Impedance Reactive Load Box and Active Attenuator Specifications:

Questions & Answers

Do you have questions about this product?

Musician’s Friend Support

Request a Callback

A Gear Adviser will call at a time more convenient for you.

What is the best time to reach you?