SP 5 Speaker Pair

SP 5 Speaker Pair Specifications:

• Full range:
• 400 Watts continuous 800 Watts program
• 1,600 Watts peak
• Sound pressure level, 1 Watt, 1 meter in anechoic environment
• Full range:
• 99.0 dB SPL (2.83 V input)
• Maximum sound pressure level (1 meter)
• Full range:
• 125 dB SPL continuous 131 dB SPL peak
• Radiation angle measured at -6 dB point of polar response:
• 90 degree horizontal by 40 degree vertical
• The vertical main polar lobe is angled down 10 degrees with respect to straight ahead being +10, -30 degrees

• Low frequency section: 1x15" SP-15825 Scorpion
• Plus HO Woofer
• High frequency section: 1x .875" exit /51mm voice coil RX M 22 compression driver on an asymmetrical Quadratic Throat, CD horn
• Box tuning frequency
• Low Frequency Section: 54 Hz
• Crossover frequency (internal passive)
• Low Frequency ” High Frequency 1800 Hz
• Impedance (Z)
• Full Range: Nominal: 8.0 Ohms, Minimum: 5.9 Ohms
• Low Frequency: Nominal: 8.0 Ohms
• Minimum: 6.9 Ohms
• Passive HF
• Nominal: 8.0 Ohms
• Minimum: 5.4 Ohms
• Input connections
• Full Range: two 1/4" phone jacks, one Neutrik four-pin Speakon jack
• Enclosure materials and finish:
• Aspen hardwood plywood enclosure
• Finished with the durable Hammertex covering
• Mounting provisions:
• This unit is not designed for overhead suspension
• Built-in SA-1 stand-mount adapter and four large rubber feet on bottom for floor use
• Dimensions (H x W x D)
• Front:
• 27.50" x 20.55" x 16.5" (699 mm x 522 mm x 419 mm)
• Rear:
• 27.50" x 15.0" x 16.5" (699 mm x 381 mm x 419 mm)
• Net Weight: 71 lb. (32.2kg)